Drying water damaged properties following a flood or an escape of water can be one of the hardest parts of the flood damage restoration process.
There are many different ways of drying a property.
The drying technique you use will affect how long the process takes and the amount of remedial work required once dry.
To choose the best drying process for your property, a specialist in drying water damaged properties will take into consideration a number of things including: how long the property has been underwater for, whether the water was white, grey or black, the type of building affected, and how quickly it needs to be restored to its pre-flooded state.
Injection drying water damaged properties
Where the sub-floor may have experienced [flood damage], such as where flood water has seeped into insulation laid beneath the flooring, it may be necessary to use injection drying to ensure moisture is effectively and thoroughly extracted.
Injection drying involves creating inlet and outlet holes and injecting warm air beneath the sub-floor. As this warm air escapes through the outlet holes, it removes with it the excess moisture, usually into a desiccant unit.
Moisture flush drying for water damaged properties
Reserved for buildings that have suffered extensive water damage, moisture flush drying is a fairly unobtrusive way of drying out a property.
By drawing air in from outside and heating it to 45°C, it draws the moisture out of the building and into the air, exhausting it from the property using a controlled venting system.
Supportive drying water damaged properties
This is a more sensitive form of drying water damaged properties that have been flooded or experienced an escape of water. Supportive drying supports conventional drying methods. It involves a small, lightweight gas-fired boiler system, placed outside of the property. This powers heat exchangers strategically placed within the contained flooded area which speed up standard dehumidification processes in a water damaged property.
Knowing which drying out approach to choose for your water damaged property can be difficult, but at Rainbow, we have technicians at branches across the UK specially trained in water damage remediation. They’ll be able to advise you in the best water extraction process and, with all the right training and equipment, they’ll be able to get your property back to its pre-water damaged state in no time at all.
On average there is a Rainbow International branch just 23 miles from any postcode in the UK, so we’re bound to have one near you.
To get your water damage remediation underway and minimise secondary damage to your property, call our national helpline on 01623 422488 24 hours a day, 7 days a week or visit our website to find your nearest branch.